Receive  information on the latest Octek Product and Firmware/Driver Update via rss. 

Click here
   
   
The POST card displays error code “26” (Error upon detecting AGP or no display) after flashing the BIOS.
       
Please make sure that you are using correct version of flash utility. We suggest users using the flash utility packaged in the zipped file with individual “.bin” file downloaded from our website. If you have already flashed with incorrect version of flash utility and faced the no display symptom, please clear the CMOS. The system will resume to normal operation. To clear the CMOS, please refer to the user’s manual. When you clear the CMOS, please be sure to follow the procedure:

1. Power off the system.

2. Remove the battery.

3. Shunt or close the header with a jumper in reference to the user’s manual.

4. Reload the battery.

5. Power on the system again. 
       

 

   Best view by IE5.5+@1024x768 with Medium Text Size. Copyright ©1998 - 2005 OCEAN OFFICE AUTOMATION PTY LTD. All rights reserved. Last modified: Monday, 11 September 2006 10:20