|
Receive information on the latest
Octek Product and Firmware/Driver Update via
 .
Click here |
| |
Specification
| CPU |
- Slot 1 for Intel Pentium II/III and Celeron
Coppermine CPU
- Support 66/100/133MHz CPU
|
| Chipset |
|
| Memory |
- 2 x 168-pins DIMM sockets up to 512 MB
- Support PC-100 SDRAM
|
| Slot |
|
| On-board I/O |
- 2 PCI IDE ports supporting up to 4
ATA2(UDMA33/UDMA66) IDE HDDs, CD-ROMs, ZIP devices and LS-120
drives as boot drive.
- Supports bus master IDE, PIO mode 4 (up to 16M
bytes/sec) and UDMA33/66 transfer mode. (bundle with an UDMA66 IDE
cable)
- 1 x ECP/EPP parallel port
- 2 x 16550-compatible UART serial ports.
- One floppy port supporting two FDDs of 360KB,
720KB, 1.2MB, 1.44MB and 2.88MB formatted capacity
- 2 x USB ports
- PS/2 Keyboard port & mouse port
- Infrared IrDA Connector
- 1 x Line/Speaker out, 1x Mic in, 1 x Line in and
MIDI / Gameport
- 1 x VGA connector
|
| Onboard Graphic Features |
- 4MB Display cache
- 3D Hyper Pipelined Architecture
- Full 2D H/W Acceleration
- Motion Video Acceleration
- 24 bit 230MHz RAM DAC up to 1600x1200 at 85Hz
Refresh
- H/W Motion Compensation Assistance for S/W MPEG2
Decode
- Software DVD at 30fps
|
| Onboard Audio Features |
- Crystal CS428/81 AC97 Audio CODEC
- DirectSound and SB compatible
- Full Duplex, Crystal 3D Enhancement, Software
wavetable
|
| BIOS Features |
- Support SMM, APM and ACPI
- 4MB Flash memory for on-board programming
- Wake-On-LAN/Modem Ring, Alarm resume
|
| Hardware Monitoring |
- Temperature, CPU and I/O voltage, Fan speed
|
| Board Size |
- 304.8mm x 170mm, ATX Form Factor
|
|
|
|
